AT Command Manual for Sierra MC87XX Module
Table Of Contents
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Diagnostic Commands
- 5: Test Commands
- 6: Memory Management Commands
- 7: Voice Commands
- 8: GPS Commands
- 9: STK Commands
- Appendix A: Test Frequencies / Channel Lists
- Appendix B: HSDPA / HSUPA Categories
- Appendix C: ASCII Table
- Appendix D: Module Customization
MC87xx Extended AT Command Reference
120 2130616
!GPSEND = <sessType>
Supporting Mini Cards:
• MC8775V
• MC8780 / 81
• MC8785V
• MC8790 / 90V
• MC8791V
• MC8792V
Note: This command is not
password-protected.
End an active session
This command ends an active position fix session.
Usage:
• AT!GPSEND=<sessType> ends the current session.
Parameters:
<sessType> (type of session to end)
• 0—Position fix session
Example:
AT!GPSEND=0 requests that the active position fix be ended. One of the
following responses will be received:
• “ERRCODE = <value>” if the request fails for any reason. See Table
8-3 on page 139 for a list of possible error codes.
• “OK” if the request succeeds
Table 8-2: GPS command details (Continued)
Command Description