AT Command Manual for Sierra MC87XX Module
Table Of Contents
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Diagnostic Commands
- 5: Test Commands
- 6: Memory Management Commands
- 7: Voice Commands
- 8: GPS Commands
- 9: STK Commands
- Appendix A: Test Frequencies / Channel Lists
- Appendix B: HSDPA / HSUPA Categories
- Appendix C: ASCII Table
- Appendix D: Module Customization
MC87xx Extended AT Command Reference
140 2130616
24 Subscription violation
25 Desired fix method failed
26 Reserved
27 No fix reported because no Tx confirmation was received
28 Network indicated normal end of session
29 No error specified by the network
30 No resources left on the network
31 Position server not available
32 Network reported an unsupported version of protocol
Table 8-4: AT command error codes (!GPSFIX)
Error code Description
0 No error
1 Invalid client ID
2 • (MC8775V / 80 / 81 / 90 / 90V) Bad service parameter
• (MC8785V) Reserved
3 Bad session type parameter
4 • (MC8775V / 80 / 81 / 90 / 90V) Incorrect privacy parameter
• (MC8785V) Reserved
5 • (MC8775V / 80 / 81 / 90 / 90V) Incorrect download parameter
• (MC8785V) Reserved
6 • (MC8775V / 80 / 81 / 90 / 90V) Incorrect network access parameter
• (MC8785V) Reserved
7 Incorrect operation parameter
8 Incorrect number of fixes parameter
9 Incorrect server information parameter
10 Error in timeout parameter
11 Error in QOS accuracy threshold parameter
12 No active session to terminate
13 • (MC8775V / 80 / 81 / 90 / 90V) Session is active
• (MC8785V) Reserved
14 Session is busy
Table 8-3: AT command error codes (!GPSEND, !GPSSTATUS, !GPSTRACK) (Continued)
Error code Description