AT Command Manual for Sierra MC87XX Module
Table Of Contents
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Diagnostic Commands
- 5: Test Commands
- 6: Memory Management Commands
- 7: Voice Commands
- 8: GPS Commands
- 9: STK Commands
- Appendix A: Test Frequencies / Channel Lists
- Appendix B: HSDPA / HSUPA Categories
- Appendix C: ASCII Table
- Appendix D: Module Customization
MC87xx Extended AT Command Reference
144 2130616
iii. TheSIMwilltakeactionontheselecteditemand
willsendanewunsolicitedcommandtothehost
forthenextoperationtobeperformed.
· Foranyother<cmdId>:
i. Respondwith“AT!STKGC=<cmdId>”toretrieve
thedatatousefor<cmdId>.
ii. Executetherequestedcommand(<cmdId>)and
respondwith“AT!STKCR=<cmdId>,<result>,...”
Configuring the host’s profile
Toconfigurethehost’sprofileforSTKsupport:
1. Atanytime,issuethecommandAT!STKPD=<bitmask>
wherethe<bitmask>indicatessupportedfeatures.
2. Resetthemodem.Whenthemodemrestarts,theprofile
automaticallydownloadstotheSIM.
Command summary
Thetablebelowliststhecommandsdescribedinthischapter.
Table 9-1: STK commands
Command Description Page
!STKC Receive unsolicited SIM command 145
!STKCR Respond to unsolicited SIM command 146
!STKGC Retrieve data for unsolicited SIM command 147
!STKMS Request menu item selection or help from SIM 148
!STKPD Update STK supported features profile 149
!STKPLI Record local provisioning information 150