AT Command Manual for Sierra MC87XX Module

STK Commands
Rev 2.9 Oct.08 157
Play tone (<cmdId = 20>)
Display text (<cmdId = 21>)
Table 9-9: Play tone parameters
Parameter Format Description
!STKGC <data> parameter — Format:
<alphaId>, <tone>, <duration>
<alphaId> Hex string Alpha identifier for user confirmation
<tone> Hex string Tone type. (SST — Standard Supervisory Tone; MPT —
ME Proprietary Tone)
• If no tone is specified, ME defaults to General beep
(“10”)
• “01” — Dial (SST)
• “02” — Called subscriber busy (SST)
• “03” — Congestion (SST)
• “04” — Radio path acknowledge (SST)
• “05” — Radio path not available / Call dropped (SST)
• “06” — Error / Special information (SST)
• “07” — Call waiting (SST)
• “08” — Ringing tone (SST)
• “10” — General beep (MPT)
• “11” — Positive ack (MPT)
• “12” — Negative ack or Error (MPT)
<duration> Integer Duration of tone to be played (in ms)
• If <duration> = 0, use a host-defined default value
!STKCR parameters
<data> Not used
<result> Integer • 0 — Command performed successfully
• 1 — Terminate proactive session
• 2 — Specified tone not supported
Table 9-10: Display text parameters
Parameter Format Description
!STKGC <data> parameter — Format:
<dcs>, <text>, <priority>, <clear>, <iconId>, <dispMode>, <response>
<dcs> Integer Data coding scheme
• 0 — 7-bit GSM default alphabet (packed)
• 4 — 8-bit GSM default alphabet (unpacked)
• 8 — UCS2 alphabet
<text> Hex string Text string in <dcs> format