AT Command Manual for Sierra MC87XX Module
Table Of Contents
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Diagnostic Commands
- 5: Test Commands
- 6: Memory Management Commands
- 7: Voice Commands
- 8: GPS Commands
- 9: STK Commands
- Appendix A: Test Frequencies / Channel Lists
- Appendix B: HSDPA / HSUPA Categories
- Appendix C: ASCII Table
- Appendix D: Module Customization
MC87xx Extended AT Command Reference
162 2130616
Set Up Menu (<cmdId = 25>)
<dispMode> Integer Icon usage
• 0 — Display icon only (replaces <alphaId>)
• 1 — Display with <alphaId> string
!STKCR parameters
<data> [<itemId>] ID of item selected, or for which help is requested
<itemId> Integer Identifier of the item that was selected
<result> Integer • 0 — Item selected OK
• 1 — Terminate proactive session
• 2 — Help information requested
• 3 — Backward move requested
• 4 — No response given
Table 9-13: Select Item parameters (Continued)
Parameter Format Description
Table 9-14: Set Up Menu parameters
Parameter Format Description
!STKGC <data> parameter — Format:
<numItems>, <selection>, <default>, <helpInfo>, <alphaId>, <iconId>,
<dispMode>
[<itemId>, <itemText>, <iconId>, <dispMode>, <nai>
[...]
<numItems> Integer Number of items that are accessible in the menu
structure
• 0 — Remove existing menu from the ME’s menu
structure
• 1 or higher — Number of menu items
<selection> Integer Preferred user selection method
• 0 — No selection preference
• 1 — Soft key selection preferred
<default> Integer Default selection item
<helpInfo> Integer Help information flag
• 0 — No help information available
• 1 — Help information available
<alphaId> Hex string Alpha identifier for user confirmation