AT Command Manual for Sierra MC87XX Module
Table Of Contents
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Diagnostic Commands
- 5: Test Commands
- 6: Memory Management Commands
- 7: Voice Commands
- 8: GPS Commands
- 9: STK Commands
- Appendix A: Test Frequencies / Channel Lists
- Appendix B: HSDPA / HSUPA Categories
- Appendix C: ASCII Table
- Appendix D: Module Customization
MC87xx Extended AT Command Reference
164 2130616
Language Notification (<cmdId = 35>)
Response notification to Mobile Originating Call Control
request (<cmdId = D4>)
!STKCR parameters
<data> Not used
<result> Integer • 0 — Text successfully added / removed
• 1 — Problem performing operation
Table 9-15: Set Up Idle Mode parameters (Continued)
Parameter Format Description
Table 9-16: Language Notification parameters
Parameter Format Description
!STKGC <data> parameter — Format:
<spec>, <lang>
<spec> Integer Language notification type
• 0 — Non-specific language notification
• 1 — Specific language notification
<lang> Hex string List of language codes
!STKCR parameters
<data> Not used
<result> Integer • 0 — Command performed successfully
Table 9-17: Response notification to MO Call Control request parameters
Parameter Format Description
!STKN <data> parameter — Format (depends on call type):
Voice: <result>, <repeatind>, <alphaId>, 0, <TON>, <NPI>, <address>,
<subaddress>, <ccp1>, <ccp2>
SS: <result>, <repeatind>, <alphaId>, 1, <TON>, <NPI>, <address>
USSD: <result>, <repeatind>, <alphaId>, 2, <dcs>, <ussd>
PDP context: <result>, <repeatind>, <alphaId>, 6, <pdp>
None: <result>, <repeatind>, <alphaId>, 7
<result> Integer Call control result
• 0 — Allowed with no modifications
• 1 — Not allowed
• 2 — Allowed with modifications