AT Command Manual for Sierra MC87XX Module
Table Of Contents
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Diagnostic Commands
- 5: Test Commands
- 6: Memory Management Commands
- 7: Voice Commands
- 8: GPS Commands
- 9: STK Commands
- Appendix A: Test Frequencies / Channel Lists
- Appendix B: HSDPA / HSUPA Categories
- Appendix C: ASCII Table
- Appendix D: Module Customization
Test Commands
Rev 2.9 Oct.08 75
!DAWGRXAGC
!DAWGRXAGC?<path>
Supporting Mini Cards:
• All
Return the RX AGC value (WCDMA only)
This command returns the RX AGC (Automatic Gain Control) value of the
main path or diversity path (if applicable). This value can be converted to
RSSI (Received Signal Strength Indicator) in dBm. See
“Calculating the
RSSI in dBm from the AGC value” on page 82.
Usage:
• AT!DAWGRXAGC returns the <AGC value> for the main path.
• AT!DAWGRXAGC?<path> returns the <AGC value> for either the main
or diversity paths.
Parameters:
<path> (for modules supporting diversity)
• 0 = Main path
• 1 = Diversity path
<AGC value> (Rx AGC value for specified path)
• -512 to +511
Note: AT!DASBAND and AT!DASCHAN must be called before you can
use !DAWGRXAGC.
Table 5-2: Test command details (Continued)
Command Description