AT Command Manual for Sierra MC87XX Module
Table Of Contents
- 1: About This Guide
- 2: AT Password Commands
- 3: Modem Status, Customization, and Reset Commands
- 4: Diagnostic Commands
- 5: Test Commands
- 6: Memory Management Commands
- 7: Voice Commands
- 8: GPS Commands
- 9: STK Commands
- Appendix A: Test Frequencies / Channel Lists
- Appendix B: HSDPA / HSUPA Categories
- Appendix C: ASCII Table
- Appendix D: Module Customization
MC87xx Extended AT Command Reference
76 2130616
!DAWINFO
Supporting Mini Cards:
• All
Note: The modem must be in
online mode to use this
command.
Return WCDMA mode RF information (WCDMA only)
This command returns RF information for WCDMA mode when the modem
is in CELL_DCH (Designated Channel) state.
Note: !DAGINFO provides RF information for GSM mode.
Returned parameters
<rxAGC> Rx AGC value:
• 0–65535
<txAGC> Tx AGC value:
• 0–65535
<txAdj> Tx AGC value after linearization (adjustment):
• 0–65535
<txLim> Tx AGC limit:
• 0–65535
<lnaRange> State of the LNA:
• 0–65535
<paOn> State of PA_ON0:
• 0–65535
<txOn> State of TX_ON:
• 0–65535
<paRange> State of PA_R1: PA_R0:
• 0–65535
<RXDrxAGC> RxD Rx AGC value:
• 0–65535
<RXDlnaRange> State of the RxD LNA:
• 0–65535
Example
Input: AT!DAWINFO
Output: RXAGC: <rxAGC> TXAGC: <txAGC>
TXADJ<txAdj> TXLIM: <txLim>
LNA: <lnaRange> PA ON: <paOn>
TX ON: <txOn> PA Range: <paRange>
RxD RXAGC: <RXDrxAGC> RxD LNA: <RXDlnaRange>
OK
Table 5-2: Test command details (Continued)
Command Description