User guide

Rev 2.0 Oct.09 18
4
4: Hardware Installation of the Raven
XE
• Connecting to Power
• Connecting to a
Computer or other
Device
• Indicator Lights
• Mounting
Note: During installation, please
be sure that the cables are
secure but do not bear any
additional weight that could
loosen the connector from the
unit.
YourRavenXEshouldbemountedinapositionthatallows
easyaccessforthecablessotheyarenotbent,constricted,in
closeproximitytohighamperage,orexposedtoextreme
temperatures.TheLEDsonthefrontpanelshouldbevisible
foreaseofoperationalverification.Youshouldensurethat

thereisadequateairflowaroundthemodembutthatitiskept
freefromdirectexposuretotheelements,suchassun,rain,
dust,etc.
Caution: The Raven XE is in a hardened case and designed for use
in industrial and extreme environments. However, unless you are
using cables expressly designed for such environments, they can fail
if exposed to the same conditions the Raven XE can withstand.
Figure 4-1: Raven XE Connectors
Note: This device is not
intended for use within close
proximity of the human body.
Antenna installation should
provide for at least a 20 CM
separation from the operator.
Antennasselectedshouldnotexceedamaximumgainof5dBi
understandardinstallationconfiguration.Inmorecomplex
installations(suchasthoserequiringlonglengthsofcableand/
ormultipleconnections),it’simperativethattheinstaller
followmaximumdBigainguidelinesinaccordancewiththe
radiocommunicationsregulationsoftheFederal
Communica‐
tionsCommission(FCC),IndustryCanada, oryourcountry’s
regulatorybody(ifusedoutsidetheUS).