User guide

10 Section 2A. Installing the Software
3.
Gripping both sides of the USB modem, insert it into your computer’s USB slot.
Alternatively, you can attach the USB extension cable to your computer’s USB slot,
connect the USB modem and laptop clip to the USB extension cable, and then attach
the laptop clip to the top of your laptop’s screen (see page 13).
4. In the “TRU-Install” Finder™ window, double-click Sprint SmartView Installer.mpkg.
5. In the “Welcome to the Sprint SmartView Installer” window, click Continue.
6. Read the Software License Agreement. To continue with the software installation, you
must click
Continue, and then click Agree to accept the terms.
7. In the “Standard Install on ...” window, click Install.
8. If a window appears prompting you for your password, enter your Mac password and
then click
OK.
9. In the window with the message that you will have to restart your computer, click
Continue Installation.
10. After the Applications window is displayed, click Continue.
11 . In the “Install Succeeded” window, click Restart.
12. After your computer restarts, proceed to “Starting the Mac Software” on page 11.
WARNING
If your computer’s USB slot is vertical, use the supplied USB extension cable and laptop
clip.
If the orientation of your computer’s USB slot or the thickness of your computer are such
that pressure is applied to the modem’s end or side, you may damage the modem or your
computer. In such cases, do not insert the modem directly into your computer’s USB slot;
use the supplied USB extension cable and the supplied laptop clip instead.