User manual

Xact Application User Manual
Xact Application User Manual Page 12
Configuration Editor
Direct to Device
SMS mode roaming allowed
GPRS UDP mode roaming allowed
GPRS TCP mode roaming allowed
GPRS UDP mode roaming allowed, SMS
fallback if no GPRS available
GPRS TCP mode roaming allowed, SMS
fallback if no GPRS available
SMS mode no roaming allowed
GPRS UDP mode no roaming allowed
GPRS TCP mode no roaming allowed
GPRS UDP mode no roaming allowed,
SMS fallback if no GPRS available
GPRS TCP mode no roaming allowed,
SMS fallback if no GPRS available
0
1
2
3
4
5
6
7
8
9
If sent directly to the device, the value is a decimal ASCII number.
Waypoint Interval
Indicates the time interval, in seconds, at which to record waypoints. Select one
of the pre-set values from the drop-down list.
If sent directly to the device, the value is the hexadecimal number of seconds in ASCII.
For example, 01E indicates that waypoints are to be recorded every 30 seconds.
Note that waypoints are initially written to the onboard memory, into a circular buffer;
they are not transmitted until an Event occurs. See Tracking Interval below.
Configuration Editor
Direct to Device
1
2
5
10
15
30
60
120
300
600
001
002
005
00A
00F
01E
03C
078
12C
258