User manual

Xact Application User Manual
Xact Application User Manual Page 5
2. Overview
The application is simple, consisting of only two windows: the main application
window and the Configuration Editor. The application is a standard Windows
executable, has no external dependencies (e.g., .Net, etc.), and should run on
most configurations of Windows computers.
Installation
To install the application:
1. make sure the USB Windows Drivers are downloaded and installed
(Sierra/Wavecom modem for the WMP100 Wireless Microprocessor);
2. download the XACT USB Loader application from the Xact Technology
Website;
3. unzip the Zip file, making sure that the folder/directory structure is
preserved;
4. run the setup.exe application.
Once installed, the Start Menu in Windows will show the application. You can
run it by selecting 
desktop icon is not created for the application. Also, there is no uninstaller; if you
need to uninstall this application, do so from the Windows Control Panel > Add
or Remove Programs.
If Xact Technology releases a new version of the application, we recommend that
you first uninstall the current version and install the new version, rather than
installing the new version over the top of the existing application.
Running the Application
Before you run the application, make sure you install the USB driver for the
device. This is also available from the Xact Technology Website, as a Zip file. The
application will not work without the USB driver installed.
Also, be sure that the Xact Development Board or other Xact device is connected

There are no menus in this application; all the controls and editable fields are
