User manual

USER MANUAL

Page

• Press the M or ► Keys to enter the “Analysis” menu. Press the ▼ Key to highlight

and select “Area”, then press the M or OK Keys.

• Areas A, B, C, and D will appear. Four corresponding temperatures will be shown

respectively at the top of the screen as well as the temperature measurement type,

Minimum, Mean or Maximum.

• To position and move the rectangular measurement areas, press the ▲

▼

◄

► Keys to move area “A” to the desired position. Press the M Key to position and

move area “B” and press the ▲

▼

◄

► Keys to move area B to the desired

position. Repeat this procedure until all areas are in the desired position.

• To change the size of the rectangular measurement areas, press the ▲

▼

◄

► Keys to select area “A”, then press the

•

Key. Press the ▲

and

► Keys to

enlarge the area and the ▼

and

◄ Keys to reduce the area. Press the

•

Key to

confirm the new size. Press the M Key to move to area “B” and repeat the procedure

above to adjust this area. Repeat this procedure for all areas.