Installation Instructions

9800002927
1
SONR Anti-Sweep Hook
Insert hooks into pegboard of
desired location without lower
metal lock plate
1
INSTALL
2
3
Allow enough space between the displays
so that product does not touch the surface
below or obstruct other merchandise.
Insert the Lock Down Plate into the holes directly
below the unit. Rotate up into place, until the screw
inserts into back plate.
4
Tighten screw with a Phillips Head
Screwdriver. Close Screw Cover Cap
when finished.
Lock Down
9800002927
2
SONR Anti-Sweep Hook
Insert the merchandise by following
the ramp upwards until product
stops, then turn the knob
counter clockwise until product
catches hook.
5
LOADING MECHANDISE
6
Open window and insert Price Label.
DISPENSING MECHANDISE
1
Hold Product
2
Turn Knob to
Release
WARNING: Do not overturn
coil. Product will go all the
way Žī the rear of the coil and
become inaccessible.
ATTENTION:
Keep product
faced to the
front
1
Place Merchandise in
the hanging position
2
LED
Turn Knob counter
clockwise until supported
by the wire hook
1~3 Dispenses in less than 30 seconds trigger
wireless notification to Siffron Echo Box
> 3 Dispenses in less than 30 seconds result in
full alarm at ECHO Box
3