User's Manual

SMAC User Manual
Sify Technologies Limited, 2011 © Copyright Protected Page 37
Version
Specify the version 1 or 2 from the drop down menu
Passive interface
Specify the passive interface as Both/Wireless/Ethernet from the
drop down menu
Update timer(sec)
Specify the update timer in seconds. Suggest remain in default
configuration
Default Metric
Specify the default metric value if required. Suggest remain in
default configuration value as one.
RIP Neighbour
Specify the neighbor IP address. Suggest remain in default
configuration value as one.
Note
All the filter related changes will take effect immediately after
clicking on ‘accept’ tab. Maximum it can support 100 routes in static
routing mode.
9.0.3 Routing mode access VLAN
Routing mode access VLAN option will get enabled after configuring the Outdoor
Subscriber (SU) in Routing mode only. Click on the VLAN settings under the Network
features menu for access VLAN settings option.