Owner's Manual

21
sigsauer.com
DISPLAY INFORMATION
The display shows you the center aiming circle, the unit of measure (Y), Angle Modified Range mode
(AMR) and the remaining battery status. The display will remain active for up to 30 seconds , or
whatever timeout has been set within in the SIG BDX App. You can then press the RANGE button to
determine range to target.
If you press the RANGE button while the rangefinder is off and continue to hold the RANGE button
down, the rangefinder will automatically switch into SCAN mode within 1 second.
After determining the distance to the target, the rangefinder will continue to display the center
aiming circle and range data for 30 seconds – and only the range data. All other information is not
shown after initial wakeup to prevent clutter in the field of view.
Display at initial wakeup Display when ranging