Owner's Manual

HyperScan MODE

While the rangefinders support single button push ranging operation, it is highly recommended that

you push and hold the RANGE button down to activate HyperScan mode. This mode allows you to

scan targets at 4X/second which significantly improves ranging performance at extreme distances.

As the ranging distances are updated very quickly in HyperScan mode, once you release the RANGE

button the last acquired distance will be displayed. When in HyperScan mode ranging distant targets,

the display may update between no result and a distant range - by using RangeLock technology the

rangefinder will report the last range result when the RANGE button is released.

CHANGING MODES OF OPERATION

The rangefinder ships with the most common modes already configured. However, you can access

and change the following features:

• Line of Sight (LOS), Angle Modified Range (AMR) or Applied Ballistics Ultralight (ABU)

• Best or Last Target

• Display Brightness (AUTO + 3 Low, 3 Medium and 3 High)

• Units of Measure (Y or M)