Operator's Manual

RANGEFINDER CONFIGURATION

PROGRAMMING SEQUENCE

Note – By using the free Sig BDX App you can easily program and congure your rangender.

1. Mode Selection (AMR, LOS, BDX-U or BDX-X)

To enter programming mode, press and release the RANGE button to wake-up the rangender.

Once the display is visible, press and hold the MODE button for 2 seconds – then release

the MODE button and the current selection will be ashing (AMR is the default setting). You

can switch between AMR, LOS, BDX-U or BDX-X by pressing and releasing the RANGE

button. Conrm your selection by pressing and releasing the MODE button which will save

your setting and index to the next setting for conguration. If you do not press and release the

MODE button the rangender will save your selection and turn o󰀨. If the user intends to use a

calculated ballistic solution, the rangender must be in BDX-U or BDX-X mode. Instructions

for downloading and conguring the BDX App on your smartphone will be detailed later in the

instructions.