Owner's Manual

34
35
sigsauer.com
RANGEFINDER HEADS-UP DISPLAY (HUD)
From the home screen of your BDX App select RANGEFINDERS to display the HUD. The HUD displays
all range, environmental and ballistic information and allows you to configure your KILO.
KILO ID and Status
Grey = disconnected / Blue = connected
Back to Home Screen
Elevation data
Range to target and unit of measure
Bullet velocity at target range
Wind speed
Ambient temperature
Active gun profile
Ballistic coefficient
Bullet weight
Help and Settings menu
Windage data
Angle of include and Mode of Operation
Bullet energy at target range
Wind direction
Local altitude
Muzzle velocity and MV Calibration
Bullet diameter
KILO SETTINGS
From the Settings menu you can fully configure the following:
1. Mode of Operation (LOS, AMR or ABU)
2. Target Mode (BEST or LAST)
3. Unit of Measure (Yards or Meters)
4. Sleep Timeout (30, 60, 120 or 180 seconds)
5. Holdover / Sight unit of Measure (MOA or MILS)
You can toggle all fields by simply touching the letters in white. Your KILO
must be turned on and paired. To save your settings touch the BDX icon in
the upper left corner of the display. This will save your settings. You can
also access the help menu by clicking on the “?” icon in the upper right of
the screen.
Note – The KILO will not range when the Settings menu is open and active.
Note – The rangefinder must be in ABU mode to calculate Real time ballistic
solutions and send them to the SIG BDX Riflescope with Bluetooth.