Owner's Manual

sigsauer.com

SIG SAUER BALLISTIC DATA XCHANGE 2.0 (BDX 2.0)

SIG SAUER’s Patent Pending BDX system takes the guesswork out of determining the proper range

and ballistics solution for hitting your target with the first round. Low Energy Bluetooth combined

with an embedded ballistic calculator (Applied Ballistics Ultralight) allows the user to configure up to

25, custom bullet profiles on the free BDX App and sync to your KILO. Line of sight range, elevation

and wind hold information is calculated instantly and displayed based on the active profile. When

combined with one of SIG SAUER’s BDX enabled riflescopes, the user ranges a target and the firing

solution is instantly shared with the BDX riflescope where the holdover dot is selectively illuminated.

BDX 2.0 has several new features for customers that want to get up and running without using

the BDX smartphone App. Your KILO has 8 embedded ballistic groups. The first 6 groups are for

centerfire rifles. Group 1 is the flattest shooting group with the least amount of drop. As the group

numbers increase, so does the bullet drop. Using the included Ballistic Groups card, locate your

caliber from the provided list. If your rounds are impacting low then move to a higher numbered

group. If your rounds are impacting high then move to a lower numbered group. Group 7 represents

common muzzleloaders and Group 8 represents an average crossbow. You can access these

ballistic groups through the normal rangefinder configuration process by turning on the KILO and

holding down the MODE button to enter programming mode.

QuickBOND™ allows you to quickly bond your KILO to a SIERRA riflescope. On the SIERRA riflescope,

insert the batteries and turn on to illumination setting 1. Then turn on the KILO by pressing and

releasing the RANGE button. Press and hold down both the RANGE and MODE buttons for at least

three seconds while looking through the KILO at the display. Once the display in the rangefinder

reads “BOND” then “GOOD” your devices have been bonded (blue LED on the SIERRA should now be

solid blue). Your calculated ballistic hold for any of the 8 ballistic groups or for a custom gun profile

are now actively synced to your SIERRA riflescope.