User's Guide

installation Guide
Ref.: MAN/DPL/EN/001
Rev.: 2.3
Date: 29 August 2014
© Copyright SIGFOX. All rights reserved Page 8 of 21
4 Bill of material
• Antenna and feeder
Component Description Index Supplier Quantity
Antenna
Omnidirectional antenna
2.1m high max
- SIGFOX 1
Antenna mounting support
Steel bracket between existing
support and antenna.
- DISTRIBUTOR 1
Low Noise Amplifier
SIGFOX Preamp 868
- SIGFOX 1
LNA V2 mounting plate - SIGFOX 1
Feeder cable
1/2" or 7/8’’ coaxial cable
2 DISTRIBUTOR
Depends on
site
configuratio
n
Jumper cable LMR400 : Ant <->
LNA (L=1.5m) connector
Nmale/Nmale
1 DISTRIBUTOR
1
Depends on
the Antenna
Jumper cable LMR400 : LNA <->
feeder 1/2" (L=1.5m max)
connector Nmale/Nfemale
7 DISTRIBUTOR 1
Jumper cable LMR 400 : 1/2" <->
TAP (L=1.5m max) connector
Nmale/Nfemale
8 DISTRIBUTOR 1 or 2
Connector
Nmale feeder
connector
- DISTRIBUTOR 2
Surge suppressor
Telegartner 90V J01028A0034
- DISTRIBUTOR 1
Grounding kit for 1/2"
feeder
DISTRIBUTOR 2
• Power supply – Case 1 : Redundant AC main power supply from site
Component Description
Index Supplier Quantity
Base station Power cable
220V power cable IEC (plug to
fem) to TAP
11-1 SIGFOX 1
• Power supply – Case 2 - Redundant power supply from inverter SIGFOX approved model
Component Description
Index Supplier Quantity
Inverter (option if power
supply is not redundant)
220V Inverter SIGFOX approved
model : INFOSEC X3 500 USB
ONDULEUR 500VA & EATON 5 S
550
- DISTRIBUTOR 1
Control cable Inverter
(option if power supply is
not redundant)
USB Cable type A to type B (1 ml)
13 DISTRIBUTOR 1
Power cable Inverter (option
if power supply is not
redundant)
220V power cable IEC (plug to
fem) to Inverter 12 SIGFOX 1
Base station Power cable
220V power cable IEC (male to
11-2 DISTRIBUTOR 1