User's Manual

User manual
Sens’it
Sens’it is a connected device whose objective is to demonstrate capabilities
of the SIGFOX network. It includes several sensors that will measure data
and send it to a web and mobile application available on www.sensit.io
SECURITY INSTRUCTIONS
 Before any use, please read carefully this manual and keep it for any later use.
 Any use not in accordance with this manual will result the exclusion of warranty and of the manufacturer’s
liability.
 Use only parts and components coming from SIGFOX and Sens’it.
 Place the Sens’it in a cool and dry area. For the withstood temperature and humidity ranges, see the technical
specifications.
 Do not leave any electronic equipment on the top the Sens’it.
 Do not submerge Sens’it in liquids
 Do not place the magnet close to electronic devices, like PCs, batteries, etc, they could be damaged, or
information could be deleted.
I. CONTENT OF THE PACK
Your Sens’it Pack contents:
 1 Sens’it
 1 magnet
 1 micro USB cable
 1 velcro scratch
 1 Sens’it user manual
II. PRESENTATION
The Sens’it includes several sensors:
 Temperature
 Humidity
 Movement (3-axis accelerometer)
 Magnetometer
 Light
It also includes
 A central button to control the device
 A Reed-switch that goes with the magnet.
 3 LEDs
The Sens’it can be configured in 6 different modes:
 Temperature and Humidity mode (LED blinks in green). In this mode, the Sens’it will send sensors’ data
at a defined frequency (every 10min, hour, 6hours, day).
 Light mode (LED blinks in yellow). In this mode, the Sens’it will either send light sensor data at a defined
frequency or will only send notification based on trigger.
 Door opening detection (LED blinks in light blue). In this mode, the Sens’it will be fixed on a door, and
will send an alert every time the door is being opened.