User Manual

SDS1000X-E User Manual
140
WWW.SIGLENT.COM
Gate Measurement
The SDS1000X-E supports gate measurement and performs the selected measurement
within the upper and lower limits of the gate. Setting the gate will affect the measurement
of all voltage, time, and delay parameters.
1. Press
Measure
→
Gate
→
On
to open the gate measurement.
2. Press the
Gate A
to move the position of gate A by the
Universal Knob.
3. Press the
Gate B
to move the position of gate B by the
Universal Knob.
4. Press the
Gate A-B
to move the positions of the gate A and B simultaneously by the
Universal Knob
.
Figure 91 Gate Measurement
Clear Measurement
Press the
Clear
softkey to clear all the measurement parameters that are displaying on
the screen.