Data Sheet

SDG800 Series DataSheet

PM Modulation

Carrier Sine, Square, Ramp, Arbitrary(except DC)

Modulation waveform Sine, Square, Ramp, Noise, Arbitrary

(2mHz~20kHz)

Phase Deviation 0~360° ,0.1°Resolution

FSK Modulation

Carrier Sine, Square, Ramp, Arbitrary(except DC)

Modulation waveform 50% duty-cycle square waveform(2mHz~50kHz)

ASK Modulation

Carrier Sine, Square, Ramp, Arbitrary(except DC)

Modulation waveform 50%duty-cycle square waveform(2mHz~50kHz)

PWM Modulation

Frequency 500μHz~20kHz

Modulation waveform Sine, Square, Ramp, Arbitrary(except DC)

Sweep

Carrier Sine, Square, Ramp, Arbitrary(except DC)

Type linear/logarithmic

Direct Up/down

Sweep time 1ms~500s

Trigger source Manual, external, internal

Burst

Waveform Sine, Square, Ramp, Pulse, Arbitrary(except DC)

Type Count(1~50,000 periods),infinite, Gated

Start/Stop phrase 0°~360°

Internal period 1μs~500s

Gated source External trigger

Trigger source Manual, External or Internal

Trigger Input

Input Level TTL compatible

Slope Up or down

Pulse width >100ns

Input impedance >5kΩ,DC coupling

SYNC Output

Voltage level TTL compatible

Pulse width >50ns

Output impedance 50Ω(typical)

Max. frequency 2MHz