User manual

SIGLENT
92 SDM3055 Digital Multimeter
Example 8: To Use Application Software
EasySDM
Remote Control function based on EasySDM enables users to operate
instrument remotely. The software supports basic measurements, Acquire,
Statistics, Trend Chart and Histogram, etc. The method to use the software will
be introduced in details as the following steps.
Operating Steps:
1. Connect the Multimeter to your computer by using USB data wire.
2. Open the main interface of EasySDM, Click【Control】on the upper left
corner and choose【Connect】to contact the instrument with the software.
As shown in the following diagram.
Diagram 3- 19 The Main Interface of EasySDM
3. Click any button on the operating interface to do corresponding operating.
4. If you want to exit the remote control, turn off the software, and then press
on the front panel to close the remote function.