User manual

SIGLENT
SDM3055 Digital Multimeter 35
To Measure Temperature
The Multimeter supports for two types of temperature sensor: TC and RTD.
The method to connect and measure Temperature will be introduced in details
as the following steps.
Operating Steps:
1. Press on the front panel to enter the Temperature measurement
interface, as shown in Diagram 2- 27.
Diagram 2- 27 Temperature Measurement Interface
2. Connect the red lead to terminal Input-HI and black lead to terminal
Input-LO as the following diagram.
Diagram 2- 28 Sketch Map for Measuring Temperature
3. Press 【Load】and use direction keys to select the required file. Then
press 【Read】to recall an existing configuration file.