User manual

SIGLENT
SDM3055 Digital Multimeter 45
Table 2- 14 Storage Function Menu Description
Function
Menu
Settings Description
Browse Choose the location that file will be saved.
File
Name
Input a file name.
Type .xml / .csv Choose the type that the file is saved.
Store
MS Data
Save the file as input file name to the current
selected location.
Done
Save all changes and return to the higher level
menu.
3. Press【Recall Settings】to enter the following interface. Use direction keys
to choose storage path and location, and press【Select】to recall the
corresponding file.
Diagram 2- 40 Recall Function Interface
4. Press【Power on】to set the Power On state of the instrument.
 You can choose【Last】 or 【Factory Default】as the initial state when the
instrument is turned on.
 The configuration is effective when you restart the Multimeter.
 DC Voltage is always the selected function when the instrument is turned
on even if you have selected【Last】 or 【Factory Default】as the Power
On state.
5. Press【Set to Defaults】to select “Factory Default” as the Power On state.