User manual

SIGLENT
SDM3055 Digital Multimeter 49
Table 2- 16 LAN Settings
Function
Menu
Description
IP Address
Set up IP address and the default setting is 10.11.11.104.
Subnet
Mask
Set up subnet mask and the default setting is 255.0.0.0.
Cancel Cancel current operation and return to the higher level menu.
Done Save all changes and return to the higher level menu.
GPIB Settings (Only for SDM3055A)
Each device on the GPIB (IEEE–488) interface must have a unique address.
The default address is 30 when the instrument is leaving the factory. The
address of Multimeter can be any integral value between 1 and 30.
Operating Steps:
1. After entering into the function menu of I/O configuration, press
【GPIB Settings】to enter the interface shown in diagram 2-45.
Diagram 2- 45 GPIB Settings
2. Users can change the value of GPIB address by direction keys.
3. Press【Select】to set the input value as GPIB address and return to the
higher level menu.