User Manual

SDS1000X-E Series Digital Oscilloscope -8
Quickly enter into the Roll mode.
The timebase range is from 50 ms/div to 100 s/div.
Horizontal POSITION Sets the horizontal location of the trigger
event on the display. The waveform will move left or right when you turn
the knob. Meanwhile, the Delay value will increase or decrease as the
waveform moves. Press down the knob to reset the trigger delay to zero.
Horizontal Time Base Set the timebase Turn it clockwise
or aticlock wise to reduce or increase the timebase. The wave will be
expanded or compressed when the timebase changes. Press down the knob
to enter into the Zoom.
Press the button to open trigger menu.This oscilloscope provides
various trigger types: Edge, Slope,Pulse, Video, Window,Interval, DropOut,
Runt, Pattern and Serial Bus (IIC/SPI/UART/RS232/CAN/LIN)
We will introduce Video, Interval, Runt, Pattern and Serial Bus trigger in the
following
HDTV Video Trigger
SDS1000X-E supports analog video signal (NTSC/PAL) trigger and HDTV
signal trigger. In video trigger, you can select custom to set any line and
eld
Front Panel
Overview
Horizontal Control Trigger Control