User Manual

SIGLENT
User Manual IX
Document Overview
This manual introduces how to use the digital oscilloscope in details.
Quick Start
Provide information about preparations before
using the instrument and a brief introduction of
the instrument.
To Set the Vertical System
Introduce the functions of the vertical system of
the oscilloscope.
To Set the Horizontal System
Introduce the functions of the horizontal system
of the oscilloscope.
To Set the Sample System
Introduce the functions of the sample system of
the oscilloscope.
To Trigger the Oscilloscope
Introduce the trigger mode, trigger coupling,
trigger hold off, external trigger and various
trigger types of the oscilloscope.
Serial Trigger
Introduce how to trigger the input signal.
To Save Reference Waveform
Introduce how to save and display REF
waveform.
To Make Math Operation
Introduce the math operation function of the
oscilloscope.
To Make Cursor Measurements
Introduce how to use cursors to make
measurements.
To Make Measurements
Introduce how to use measure function to
measure the waveform parameters.
Display Setting
Introduce how to set the display of the
oscilloscope.
Save and Recall
Introduce how to save and recall the
measurement result and the setting of the
oscilloscope.
System Setting
Introduce how to set the system setup.
Default
Introduce the Default setup of the oscilloscope
Troubleshooting
Introduce how to deal with common failures of
the oscilloscope.