User Manual

SIGLENT
112 User Manual
Note: The vertical Variable knob and the vertical Position knob are only works for
the reference waveform and the math waveform. Please make a difference
with the channel vertical system.
To Adjust REF Waveform Display
1. Please refer to the “To Display REF Waveform” above to display the desired
reference waveform.
2. Press the Scale and Position softkey and turn the universal knob to adjust the vertical
scale and position of the reference waveform. The vertical scale and position
information display at the middle of the screen.
The initial values display at the middle of the screen is the setup that when the reference
waveform been saved.
Figure 42 Reference Waveform
To Clear REF Waveform Display
The oscilloscope does not have the “Clear” option under the REF WAVE function menu.