User Manual

SIGLENT
156 User Manual
IO Set
The oscilloscope provides abundant IO interfaces, including: USB Device, LAN and Aux
Output.
To Set the USB Device
Do the following steps to set the oscilloscope to communicate with PC via USB:
1. Install the USBTMC device driver on PC. Suggest you install NI Vista.
2. Connect the oscilloscope with PC using a standard USB cable
3. Press the Utility button on the front panel to enter the UTILITY function menu.
4. Press the IO Set softkey to enter the I/O SET function menu.
5. Press the USB Device softkey to select USBTMC.
6. Use EasyScopeX or NI Vista to communicate with the oscilloscope.
Do the following steps to set the oscilloscope to print the screen image:
1. Connect the oscilloscope with print using a standard USB cable.
2. Press the Utility button on the front panel to enter the UTILITY function menu.
3. Press the IO Set softkey to enter the I/O SET function menu.
4. Press the USB Device softkey to select Printer.
5. Press the Print button on the front panel to print the screen image.