Manualshelf

User Manual

ManualsBrandsSIGLENT ManualsTest & Measuring EquipmentSuper Phosphor Oscilloscope SIGLENT SDS1072X-E
61626364656667686970
SIGLENT
52 User Manual
Trigger Level
Trigger level and slope define the trigger point,
Positive Slope
Negative Slope
Trigger Level
Trigger Point Trigger Point
Input Signal
You can adjust the trigger level for a selected analog channel by turning the Trigger Level
Knob.
You can push the Trigger Level Knob to set the level to the waveform's 50% value
immediately. If AC coupling is used, pushing the Trigger Level knob sets the trigger level
to about 0 V.
The position of the trigger level for the analog channel is indicated by the trigger level icon
(If the analog channel is on) at the left side of the display. The value of the analog
channel trigger level is displayed in the upper- right corner of the display.