Manualshelf

User Manual

ManualsBrandsSIGLENT ManualsTest & Measuring EquipmentSuper Phosphor Oscilloscope SIGLENT SDS1072X-E
71727374757677787980
SIGLENT
User Manual 55
Noise Rejection
Noise Reject adds additional hysteresis to the trigger circuitry. By increasing the trigger
hysteresis band, you reduce the possibility of triggering on noise. However, this also
decreases the trigger sensitivity so that a slightly larger signal is required to trigger the
oscilloscope.
Press the Setup button on the front panel, and then press the Noise Reject softkey
continually to set the option to On or Off to turn on or off the noise rejection function.
Figure 21 Turn off the Noise Reject