Manualshelf

User Manual

ManualsBrandsSIGLENT ManualsAccessories & Measuring Equipment SoftwareLogic Analyzer Probe SLA1016 for SIGLENT SDS1104X-E, SDS1204X-E
12345
© 2018 SIGLENT TECHNOLOGIES | 1
Adding MSO/Logic Analyzer Capability to the SDS1004X-E Series of Oscilloscopes
February 26, 2018
Mixed Signal Oscilloscopes (MSO’s for short) feature the ability to show both analog and digital signals
using the same timebase. This is essentially like adding a logic analyzer (LA) to the analog scope portion of
the design.
The SIGLENT 4 channel SDS1004X-E series of oscilloscopes (currently the 100 MHz SDS1104X-E and 200
MHz SDS1204X-E models) can be upgraded to include the ability to measure up to 16 digital/logic
channels. This allows the user to conveniently view up to 4 analog (8-bit resolution) and 16 digital (1-bit
resolution) channels on the same timebase which can quickly correlate analog and digital events.
To add MSO capability to your SDS1004X-E:
Update the firmware of the oscilloscope to version 7.6.1.20 or higher. You can find the latest1.
version here on the SDS1000X-E Firmware Page.
2. Purchase the SLA1016 hardware. This includes the wiring harnesses and modules to physically connect
to the instrument and Device Under Test (DUT):

Summary of content (5 pages)