User Manual

SIGLENT
102 User Manual
significant bits can be changed.)
 If you select the ID+DATA condition:
a. Press ID bits softkey to select the ID’s length (11 or 29 bits).
b. Press Curr ID Byte softkey and use Universal Knob to select the byte that
you want to modify.
c. Press the ID softkey and set the ID’s value by Universal Knob.
d. Press Data1 softkey and set the value of the first byte by Universal Knob.
e. Press Data2 softkey and set the value of the second byte by Universal Knob.
See as figure56, the trigger condition is ID, ID’s value is 0x013, Baud rate is 100kb/s:
Figure 56 CAN Trigger