SDS2000X-E Series DataSheet-2018.
SDS2000X-E Series Digital Oscilloscope Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern Serial bus triggering and decoding (standard), supports protocols IIC, SPI, UART, CAN, LIN SDS2202X-E SDS2352X-E Video trigger, supports HDTV Low background noise with voltage scales from 500μV/div to 10V/div 10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print Segmented acquisition
SDS2000X-E Series Digital Oscilloscope Models and key Specification Model Bandwidth SDS2202X-E 200 MHz SDS2352X-E 350 MHz Sampling Rate (Max.) 2 GSa/s Channels 2+EXT Memory Depth (Max.) 14 Mpts/CH (not interleave mode) 28 Mpts/CH (interleave mode) Waveform Capture Rate (Max.
SDS2000X-E Series Digital Oscilloscope Maximum sample rate of 2 GSa/s, record Length of up to 28 Mpts Waveform Capture Rate up to 400,000 wfm/s Using hardware-based Zoom technologies and max record length of up to With a waveform capture rate of up to 400,000 wfm/s (sequence mode), 28 Mpts, users are able to oversample to capture for longer time periods the oscilloscope can easily capture the unusual or low-probability events.
SDS2000X-E Series Digital Oscilloscope Hardware-Based High Speed Pass/Fail function 16 Digital Channels/MSO (option) The SDS2000X-E utilizes a hardware-based Pass/Fail function, performing 16 digital channels enables users to acquire and trigger on digital input up to 40,000 Pass / Fail decisions each second. Easily generate user channels and view both digital and analog waveforms simultaneously defined test templates provide trace mask comparison making it suitable with one instrument.
SDS2000X-E Series Digital Oscilloscope USB WIFI Adapter (option) Web control WiFi control of instrumentation can provide a convenient and safe With the new embedded web server, users can control the SDS2000X-E method of configuring and collecting data. This new feature works from a simple web page. This provides wonderful remote troubleshooting with a SIGLENT approved WiFi adapter to provide wireless control and and monitoring capabilities.
SDS2000X-E Series Digital Oscilloscope Specifications Acquire System Sampling Rate 2 GSa/s (single channel), 1 GSa/s (two channels) Memory Depth Max 28 Mpts/Ch (single channel), 14 Mpts/Ch(two channels) Peak Detect 1 nsec Average Averages: 4, 16, 32, 64, 128, 256, 512, 1024 Eres Enhance bits: 0.5, 1.5, 2, 2.5, 3 Waveform interpolation Sin(x)/x, Linear Input Channels 2+EXT Coupling DC, AC, GND Impedance DC 1 MΩ: (1 MΩ ± 2%) || (18 pF ± 2 pF) DC 50 Ω: 50 Ω ± 2% Max.
SDS2000X-E Series Digital Oscilloscope Horizontal System Timebase Scale 500 ps/div-100 s/div Channel Skew <100 ps Waveform Capture Rate Up to 110,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) Intensity Grading 256 Levels Display Format Y-T, X-Y, Roll Timebase Accuracy ±25 ppm Roll Mode 50 ms/div-100 s/div (1-2-5 step) Trigger System Trigger Mode Auto, Normal, Single Internal: ±4.5 div from the center of the screen Trigger Level EXT: ±0.6 V EXT/5: ±3 V Holdoff Range 80 ns - 1.
SDS2000X-E Series Digital Oscilloscope Pulse Trigger Polarity +wid , -wid Limit Range <, >, <>, >< Source All channels Pulse Range 2 ns - 4.
SDS2000X-E Series Digital Oscilloscope Serial Trigger I2C Trigger Condition Start, Stop, Restart, No Ack, EEPROM, 7 bits Address & Data, 10 bits Address & Data, Data Length Source (SDA/SCL) All channels Data Format Hex Limit Range EEPROM: =, >, < Data Length EEPROM: 1 byte Addr & Data: 1-2 byte Data Length: 1-12 byte R/W bit Addr & Data: Read, Write, Do not care SPI Trigger Condition Data Source (CS/CL/Data) All channels Data Format Binary Data Length 4-96-bit Bit Value 0, 1, X Bit Ord
SDS2000X-E Series Digital Oscilloscope Serial Decoder Number of Decoders 2 I2C Decoder Signal SCL, SDA Address 7, 10 bits Threshold -4.5 - 4.5 div List 1 - 7 lines SPI Decoder Signal SCL, MISO, MOSI, CS (2 channel scopes can only use 2 signal identifiers) Edge Select Rising, Falling Idle Level Low, High Bit Order MSB, LSB Threshold -4.5 - 4.5 div List 1 - 7 lines UART Decoder Signal RX, TX Data Width 5, 6, 7, 8-bits Parity Check None, Odd, Even Stop Bit 1, 1.
SDS2000X-E Series Digital Oscilloscope Measurement Source All channels, All channels in Zoom, Math, All References, History Number of Measurements Display 4 measurements at the same time.
SDS2000X-E Series Digital Oscilloscope Measurement Cursors Manual : Time X1, X2, (X1 -X2), (1/ΔT) Voltage Y1, Y2, (Y1 -Y2) Track: Time X1, X2, (X1 -X2) Statistics Current, Mean, Min, Max, Stdev, Count Counter Hardware 6-digit counter (channels are selectable) Math Function Operation + , - , * , / , FFT, d/dt, ∫dt, √ FFT window Rectangular, Blackman, Hanning, Hamming, Flattop FFT display Full Screen, Split, Exclusive USB AWG Module (option) Channel 1 Max.
SDS2000X-E Series Digital Oscilloscope DC Offset range Accuracy ±1.5 V (50 Ω load) ±3 V (High-Z load) ± (|offset|* 1% + 3 mV) Noise Bandwidth > 25 MHz (-3 dB) Arbitrary Wave Frequency 1 μHz ~ 5 MHz Wave Length 16 kpts Sampling Rate 125 MSa/s Lead In EasyWave and U-Disk Digital Channels (option) No. of Channels 16 Max. Sampling Rate 1 GSa/s Memory Depth 14 Mpts/CH Min. Detectable Pulse Width 4 ns Level Group D0 ~ D7, D8 ~ D15 Level Range -8 V ~ 8 V Logic Type TTL, CMOS, LVCMOS3.
SDS2000X-E Series Digital Oscilloscope Environments Temperature Operating: 10℃ ~ +40℃ Non-operating: -20℃ ~ +60℃ Humidity Operating: 85% RH, 40℃ , 24 hours Non-operating: 85% RH, 65℃ , 24 hours Height Operating: ≤3000 m Non-operating: ≤15,266 m Compliance LVD IEC 61010-1:2010 EMC EN6 1326-1:2013 Power Supply Input Voltage Power 100 - 240 Vrms (± 10%), 50 / 60 Hz 100 - 120 Vrms (± 10%), 400 Hz 50W Max Mechanical Length: 312 mm Dimensions Width: 132.6 mm Height: 151 mm Weight WWW.SIGLENT.COM N.
SDS2000X-E Series Digital Oscilloscope Probes and Accessories Probe Model Picture Description PP510 Passive PP215 Bandwidth: 200 MHz, 1X/10X, 1 M/10 Mohm, 300 V/600 V Bandwidth: 350 MHz, 1X/10X, 1 M/1 Mohm, 150 V/300 V SP2035 Bandwidth: 100 KHz, Max. continuous current: 20 Arms, Peak current: 60 A CP4020 Switch Ratio: 50 mV/A, 5 mV/A, Accuracy: 50 mV/A (0.4 A-10 Apk)±2%, 5 mV/A (1 A-60 Apk) ±2%, 9 V battery source Bandwidth: 1MHz, Max.
SDS2000X-E Series Digital Oscilloscope Probe Model DPB5150A Picture Description Bandwidth: 100 MHz, Differential Range: 1500 V (DC + Peak AC), 50X/500X , Accuracy: ±2% DC 5 V/1 A USB adapter Bandwidth: 70 MHz, Differential Range: 7000 V (DC + Peak AC), DPB5700 100X/1000X , Accuracy: ±2%, DC 5 V/1 A USB adapter Bandwidth: 100 MHz Differential Range: 7000 V (DC + Peak AC), DPB5700A 100X/1000X Accuracy: ±2% DC 5 V/1 A USB adapter Bandwidth: 40 MHz High Voltage HPB4010 Differential Range: DC 10 KV,
SDS2000X-E Series Digital Oscilloscope Ordering information SDS2000X-E Series Digital Oscilloscope Product Name SDS2202X-E 200 MHz SDS2352X-E 350 MHz USB Cable -1 Quick Start -1 Standard Accessories Passive Probe -2 Certification of Calibration -1 Power Cord -1 Optional Accessories 16 Channels MSO Software SDS2000X-E-16LA 16 Channels Logic Analyzer SLA1016 AWG Software SDS2000X-E-FG USB AWG Module Hardware SAG1021 WIFI Software SDS2000X-E-WIFI USB WIFI Adapter TL_WN725N Isolated Front End
SDS2000X-E Series Super Phosphor Oscilloscope About SIGLENT SIGLENT is an international high-tech company, concentrating on R&D, sales, production and services of electronic test & measurement instruments. SIGLENT first began developing digital oscilloscopes independently in 2002.
