User Manual

SIGELNT
SPD1000X User Manual 39
 Brackets ({}) contain parameter choices. Brackets are not sent with the
command string.
 Vertical line (|) separates parameter selections.
 Angle brackets (<>) indicates that you must specify a value for the
parameter inside the brackets. For example, for the <voltage> parameter
in angle brackets for the above command, you must specify a value for
this parameter (for example, "CH1: VOLT 10"). Angle brackets do not
send angle brackets along with the command string.
 Optional parameters are enclosed in square brackets ([]). If you do not
specify a value for the optional parameter, the instrument uses the default
value. For example, [CH1:] in the above command can be omitted (for
example, "VOLT 10"). At this time, the command will operate on the
current channel. Brackets are not sent with the command string.
3.3 Command Summary
1、 *IDN?
2、 *SAV
3、 *RCL
4、 INSTrument {CH1|CH2}
5、 INSTrument ?
6、 MEASure:CURRent?
7、 MEAsure:VOLTage?
8、 MEASure:POWEr?
9、 [SOURce:]CURRent <current>