User Manual

SIGELNT
44 SPD1000X User Manual
8、 MODE
Command
MODE:SET {2W|4W}
Description
To set the work operation of 2W or 4W
Example
MODE:SET 4W
9、 OUTPut
Command format
OUTPut <SOURce>, <state>
<SOURce>:={CH1}; <state>:={ON|OFF}
Description
Turn on/off the channel.
Example
OUTPut CH1, ON
10、 TIMEr
Command format
TIMEr: SET <SOURce>, <secnum>, <volt>, <curr>,
<time>
<SOURce>:={CH1}; < secnum >;=1 to 5;
Description
Set timing parameters of specified channel
Example
TIMEr: SET CH1, 2, 3, 0.5, 2
Command format
TIMEr: SET? <SOURce>, <secnum>
<SOURce>:={CH1}; < secnum >;=1 to 5;
Description
Query the voltage/current/time parameters of specified
group of specified channel.
Example
TIMEr: SET? CH1, 2