Quick Start Guide

SSG5000X Signal Generator 6
Direction knob and keys operation
1. Direction knob
In the non-parametric input state, turn the knob to move the focus frame in sequence.
Press the knob in the function area to enter the next level menu bar.
Press the knob in the parameter input area, the cursor will focus to a certain position, and then turn the knob to change the value.
2. Direction keys
In the non-parametric input state, press the up, down, left and right direction keys to move the focus frame in sequence.
Press the knob in the parameter input area, the cursor will focus to a certain position, then press the left and right direction keys to change the position of the
cursor, and use the up, down, left and right keys to fine tune the value of the cursor position.
Front panel key backlight
1. Power switch
Orange light constantly on indicates the unit is in stand-by state.
Green light constantly on indicates the instrument is in the normal operated state.
2. MOD ON/OFF
When the MOD ON/OFF is set to turn on the modulation, the backlight will illuminate. If modulation is off, the backlight will remain dark.
3. RF ON/OFF
When the RF signal is turned on, the backlight is on. If the RF signal output is turned off, the backlight will remain dark.