Quick Start Guide

SSG5000X Signal Generator 12
User
Interface
1. Prompt status bar
Display LOCAL (local), REMOTE (remote). When REMOTE is displayed, the instrument is being controlled by a remote computer and the front panel inputs will be
locked. To unlock (LOCAL mode), press Esc/Close.
EXT REF: EXT REF shows that the SSG is using an external 10 MHz reference.
LF: Low frequency signal generator state.
MOD: The modulation state.
RF: The RF output state.
SWEEP: The status of the sweep state.
AWGN: The status of the Additive White Gaussian Noise (AWGN) to a carrier when IQ Modulation.
UF: Amplitude flatness function enabled.
OFFSET: Amplitude offset enabled.
The identification is displayed when a USB disk is inserted.
LAN: LAN state. indicates that LAN is successfully connected. indicates that there is no network connection or network connection failed.
2. RF frequency
RF output frequency setting. When the scan type is "frequency" or "frequency & amplitude", the frequency scanning progress bar is displayed.
3. RF level
RF output level setting. When the scan type is "amplitude" or "frequency & amplitude", level scanning progress bar is displayed.