User Manual

SIGLENT
SSG5000X User Manual 91
the zeroing result. Zero buttons is displayed.
Press the “Click to perform zeroing” button, and the instrument performs the zero
calibration operation of the power meter according to the “zero calibration type”
you selected. This feature can be used to reduce the effects of noise and zero offset
on the measurement results. And the button name will change from “Click to
perform zeroing” to “Zero In Progress...” After the zero adjustment is completed,
the button name will be restored to the word “Click to perform zeroing”.
Note: If the power meter does not have an internal or external zeroing option, the
“internal” and “external” in the drop-down boxes are replaced by the “Enable”
option.
Measure Frequency
The default is “Auto”. Click the drop down box to switch the mode.
⚫ Auto: In this mode, the instrument configures the frequency value based on the
output frequency of the RF.
⚫ Manual: In this mode, the measurement frequency can be set by the touch
screen keyboard or the front panel keypad.