User Manual

SIGLENT
SSG5000X User Manual 106
Waveform Segment
Press I/Q->ARB->Waveform Segment，to enter the volatile waveform file directory,
Waveform segment must reside in volatile storage media before they can be played,
edited, or included in a sequence.
1. Load
Load the waveform segment file (*.arb) from the non-volatile memory into the volatile
memory， then add the name and point of the waveform segment in the list of
waveform segments.
Select waveform segment in Select Waveform
1) Press I/Q ->ARB->Select Waveform, and select a waveform segment.
2) Set ARB State to on.
3) Turn on the I/Q MOD module switch on the main page, or set MOD ON/OFF to on.
4) Configure the RF OUTPUT.
The waveform segment is now available at the signal generator’s [RF OUTPUT 50Ω]
connector.
2. Save
Save waveform segment, saving waveform file in volatile memory into non-volatile
memory. Optionally rename the waveform segment.