User Manual

SIGLENT
SSG5000X User Manual 110
Playing a Sequence
After creating a sequence, we can select the sequence to play:
1) Press I/Q ->ARB->Select Waveform, and select a waveform sequence.
2) Set ARB State to on.
3) Turn on the I/Q MOD module switch on the main page, or set MOD ON/OFF to on.
4) Configure the RF OUTPUT.
The waveform sequence is now available at the signal generator’s [RF OUTPUT 50Ω]
connector.
ARB Setup
Press I/Q ->ARB-> ARB Setup to enter the arbitrary waveforms setting interface. The