User Manual

SIGLENT
SSG5000X User Manual 122
memory and start playing.
Marker Utilities
This chapter introduces the concept and usage of waveform marker.
Press I/Q->ARB->Marker Utilities to enter marker setting menu.
About the Waveform Marker
SSG5000X provides four waveform markers to mark specific points on a
waveform segment. You can set each marker’s polarity and marked points (on a
single sample point or over a range of sample points). When the signal generator
encounters an enabled marker, an auxiliary signal is routed to the rear panel
[IQ_EVENT] output.
You can use an auxiliary output signal to synchronize another instrument with
the waveform, or as a trigger signal to start a measurement at a given point on a
waveform. You can also configure markers to initiate RF Blanking.
Marker Number
Click this item to set the waveform marker being operated. There are “1”,