User Manual

SIGLENT
SSG5000X User Manual 123
“2”, “3” and “4” four markers for selecting.
Output Mux
Click this item to select the marker to be output, and the [IQ_EVENT] connector on
the rear panel will output the corresponding pulse signal according to the
currently selected marker and related settings.
Marker Polarity
The default value is "Negative". Click the drop-down box to switch the polarity of
the marker.
⚫ Positive: the high level (3.3V) signal is output during the on marker points, and
the low level (0V) signal is output during the off marker points.
⚫ Negative: the low level (0V) signal is output during the on marker points, and
the high level (3.3V) signal is output during the off marker points.
Pulse/RF Blank
When this option is turned on, the signal generator blanks the RF output when
the marker signal goes low. The following figures show two examples to