User Manual

SIGLENT
SSG5000X User Manual 128
"I" and "Q" on the right side of Y axis represent the output waveforms of I and Q
of the currently selected waveform segment. "1", "2", "3" and "4" represent four
marker signals.
The horizontal direction of the schematic diagram represents the sample point
and marker point of the waveform segment, and the vertical direction
represents the power level of the output signal.
2) Control area:
Click the button to return to the previous marker point setting page;
Click the button to resume the diagram to the initial state;
Click the button to zoom in the diagram;
Click the button to zoom out the diagram;
The “Zoom Position” parameter control displays the start position of the
diagram, and the operations of and buttons are based on this
position.