User Manual

SIGLENT
SSG5000X User Manual 135
3) Reset & Run: Plays the waveform when a trigger is received; subsequent triggers
restart the waveform.
Single Mode
The single mode can be set to no retrigger, buffered trigger or restart on trigger mode.
1) No Retrigger: Ignores an early trigger received while a waveform is playing.
2) Buffered Trig: An early trigger received while a waveform is playing waits until the
current waveform completes, then plays the waveform once more.
3) Restart on Trig: An early trigger received while the waveform is playing
immediately restarts the waveform.
Segment Advance Mode
The segment advance mode can be set to single or continuous mode.
1) Single: A segment in a sequence plays once, ignoring the repetition setting, after
which the dual ARB player stops and waits for a trigger before advancing to the
next segment. The next segment then plays to completion.
If a trigger is received while a segment is playing, the segment plays to completion.
The dual ARB player then advances to the next segment and plays that segment to
completion.