User Manual

SIGLENT
SSG5000X User Manual 138
effect.
Delay Samples
Set the number of sampling points from the time when the external trigger signal is
received until the trigger takes effect, that is
delay time = delay samples / sample clock.
Note: When the trigger mode is initially selected or when changing from one trigger
mode to another, the carrier signal on the RF output may be lost until the modulating
signal is triggered. This is because the signal generator sets the I and Q signals to 0 V
before the first trigger event.
Waveform Header
Press I/Q->ARB->Waveform Header to enter the waveform header setting menu.
About Waveform Header
For certain waveforms, you can save the settings and parameters of the signal
generator in the header file, including the marker settings. When you load the
stored waveform file into the BBG storage medium, the header file settings are
automatically applied to the signal generator so that set up the signal generator