User Manual

SIGLENT
SSG5000X User Manual 141
Settings column display the same values.
Note: in order to save the waveform segment header file parameters to non-volatile
memory, you need to press I/Q -> ARB -> Waveform Segment and re-save the
waveform segment.
Waveform File Type
ARB waveform segments can be loaded into three file types: * .arb, * .wd and * .wdtxt,
which can be copied to the device's non-volatile memory through ftp or U disk.
arb file
The arb file (* .arb) is generated by the signal generator, or generated by the EasyIQ
software.
WDbin file
A wd file (* .WDbin) is a binary file of pure waveform data. The I and Q waveform data
are 16-bit complement data and are alternately stored in the file.